Valeo beep&park™ | 4x Sensors + 1 LCD Display

4x Sensors + 1 LCD Display

Valeo beep&park™ 632201 is a parking assistance product featuring 4 sensors that can be used for fitting on the front or rear of your vehicle and 1 LCD display to visually alert the driver to obstacles.

Added values

I am worried about hitting obstacles or pedestrians I can’t see in my rearview mirrors. The risk of collision is increased by the presence of low obstacles and bollards located close to parking spaces. My bumper is often scratched or dented and it costs a small fortune to repair it.

Now I can see the obstacles clearly behind the vehicle on a screen thanks to the new park vision.

Our Offer

A solution to your parking needs

Safety

Reduced risks of accidents thanks to a system of alerts

Comfort

Improved road-handling and driving comfort

Key savings

Avoid costly repairs by limiting impacts.

Choose Valeo

Beep&Park 4x Sensors + 1 LCD Display

Beep&Park™ range is a solution to your everyday parking problems

Detection sensors

  • The system features 4 front or rear ultrasonic sensors for consistent detection.
  • If the sensors are fitted to the rear then they are activated as soon as the reverse gear is engaged.
  • If the sensors are fitted to the front, when the vehicle starts they are activated, for 30 seconds at the start, and they remain active for 8 to 20 seconds each time the brake pedal is released (depending on the chosen setting).      

How it works?

Obstacles in front of or behind the vehicle (other vehicles, posts, pedestrians, etc) are detected and announced by a sound signal PureSound alarm

  • The audible alarm gradually intensifies. It is intermittent at first and becomes continuous when the vehicle is within 30 cm of the obstacle.
  • The system detects obstacles located between 10cm and 170cm from the vehicle.

Visual alarm

  • The distance from the obstacle and its precise position are shown on the control screen positioned above the rearview mirror or on the dashboard.
  • The distance of the obstacles is visualised to the driver by three different alert levels- green, yellow and red.
  • The system visualises the obstacles located in metres and inches.

A diagnostic function

  • The system automatically detects defective or badly fixed sensors
  • The screen warns the driver and identifies the defective sensor

References

Valeo introduces the New technology sensors in the wide range of beep&park® to allow you to benefit from the latest innovations.

OPTIMAL PERFORMANCE

  • New Electronic control unit for optimal detection in case of heavy rain
  • New sensor design for improved evacuation of water droplets

OPTIMAL COMPATIBILITY

  • The range is compatible with pulsed reverse signal. It applies to vehicles in which the reverse light does not have a DC supply voltage (12 VDC) but a modulated, pulsed supply voltage (12 V~).
  • Compatibility with towing system has been extended to the six kits.
  • Certifications : E-mark, CE & Rohs and REACH, MALSO standard complaint (ISO 17386)

OPTIMAL FITTING

  • New rings to correct the angles of the sensors which allows the same drill hole diameter to be used in the various configurations (0°, 4°, 10°)
Download catalogue

Technology / Innovation

For a website that fits you, select your profile now